dmesg - Atom C3950
Linux version 4.15.0-999-generic (kernel@tangerine) (gcc version 7.2.0 (Ubuntu 7.2.0-8ubuntu3.1)) #201802012101 SMP Fri Feb 2 02:03:22 UTC 2018
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[3]: 576, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 640, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000077e3cfff] usable
BIOS-e820: [mem 0x0000000077e3d000-0x0000000077e4cfff] reserved
BIOS-e820: [mem 0x0000000077e4d000-0x000000007d3defff] usable
BIOS-e820: [mem 0x000000007d3df000-0x000000007de99fff] reserved
BIOS-e820: [mem 0x000000007de9a000-0x000000007df93fff] usable
BIOS-e820: [mem 0x000000007df94000-0x000000007e359fff] ACPI NVS
BIOS-e820: [mem 0x000000007e35a000-0x000000007f266fff] reserved
BIOS-e820: [mem 0x000000007f267000-0x000000007f30bfff] type 20
BIOS-e820: [mem 0x000000007f30c000-0x000000007f7fffff] usable
BIOS-e820: [mem 0x000000007f800000-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.60 by American Megatrends
efi: ACPI 2.0=0x7e294000 ACPI=0x7e294000 SMBIOS=0x7f1bf000 SMBIOS 3.0=0x7f1be000 MPS=0xfcb40 ESRT=0x7c2a9f18 MEMATTR=0x7c2a0018
random: fast init done
SMBIOS 3.0.0 present.
DMI: empty empty/\xe0\xefb\x7f, BIOS V1.00 08/04/2017
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x280000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7E00000000 write-back
1 base 0200000000 mask 7F80000000 write-back
2 base 007F800000 mask 7FFF800000 uncachable
3 base 0080000000 mask 7F80000000 uncachable
4 base 00DF600000 mask 7FFFE00000 write-through
5 base 00DF800000 mask 7FFFE00000 write-through
6 base 00DFA00000 mask 7FFFF00000 write-through
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
x2apic: enabled by BIOS, switching to x2apic ops
e820: last_pfn = 0x7f800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fce40-0x000fce4f] mapped at [ (ptrval)]
esrt: Reserving ESRT space from 0x000000007c2a9f18 to 0x000000007c2a9f50.
Scanning 1 areas for low memory corruption
Base memory trampoline at [ (ptrval)] 96000 size 24576
Using GB pages for direct mapping
BRK [0x1db93f000, 0x1db93ffff] PGTABLE
BRK [0x1db940000, 0x1db940fff] PGTABLE
BRK [0x1db941000, 0x1db941fff] PGTABLE
BRK [0x1db942000, 0x1db942fff] PGTABLE
BRK [0x1db943000, 0x1db943fff] PGTABLE
BRK [0x1db944000, 0x1db944fff] PGTABLE
BRK [0x1db945000, 0x1db945fff] PGTABLE
BRK [0x1db946000, 0x1db946fff] PGTABLE
BRK [0x1db947000, 0x1db947fff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x31da3000-0x34ec8fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000007E294000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000007E294090 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000007E298D38 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000007E2941C0 004B72 (v02 ALASKA A M I 01072009 INTL 20061109)
ACPI: FACS 0x000000007E358080 000040
ACPI: FPDT 0x000000007E298E50 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x000000007E298E98 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000007E298F38 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: APIC 0x000000007E298F78 0000D8 (v04 INTEL TIANO 00000001 MSFT 00000000)
ACPI: BDAT 0x000000007E299050 000030 (v01 00000000 00000000)
ACPI: HPET 0x000000007E299080 000038 (v01 ALASKA A M I 00000001 MSFT 01000013)
ACPI: UEFI 0x000000007E2990B8 000042 (v01 ALASKA A M I 00000002 01000013)
ACPI: SSDT 0x000000007E299100 001901 (v02 PmRef CpuPm 00003000 INTL 20061109)
ACPI: DMAR 0x000000007E29AA08 000070 (v01 INTEL BDW 00000001 INTL 00000001)
ACPI: HEST 0x000000007E29AA78 0000A8 (v01 INTEL VND 00000001 INTL 00000001)
ACPI: BERT 0x000000007E29AB20 000030 (v01 INTEL VND 00000001 INTL 00000001)
ACPI: ERST 0x000000007E29AB50 000230 (v01 INTEL VND 00000001 INTL 00000001)
ACPI: EINJ 0x000000007E29AD80 000150 (v01 INTEL VND 00000001 INTL 00000001)
ACPI: WSMT 0x000000007E29AED0 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to cluster x2apic.
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
NODE_DATA(0) allocated [mem 0x27ffd5000-0x27fffffff]
tsc: Using PIT calibration value
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000027fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x0000000077e3cfff]
node 0: [mem 0x0000000077e4d000-0x000000007d3defff]
node 0: [mem 0x000000007de9a000-0x000000007df93fff]
node 0: [mem 0x000000007f30c000-0x000000007f7fffff]
node 0: [mem 0x0000000100000000-0x000000027fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff]
On node 0 totalpages: 2087260
DMA zone: 64 pages used for memmap
DMA zone: 90 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 7975 pages used for memmap
DMA32 zone: 510397 pages, LIFO batch:31
Normal zone: 24576 pages used for memmap
Normal zone: 1572864 pages, LIFO batch:31
Reserved but unavailable: 97 pages
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 16 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x77e3d000-0x77e4cfff]
PM: Registered nosave memory: [mem 0x7d3df000-0x7de99fff]
PM: Registered nosave memory: [mem 0x7df94000-0x7e359fff]
PM: Registered nosave memory: [mem 0x7e35a000-0x7f266fff]
PM: Registered nosave memory: [mem 0x7f267000-0x7f30bfff]
PM: Registered nosave memory: [mem 0x7f800000-0x7fffffff]
PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfcffffff]
PM: Registered nosave memory: [mem 0xfd000000-0xfe7fffff]
PM: Registered nosave memory: [mem 0xfe800000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x80000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144
pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
Built 1 zonelists, mobility grouping on. Total pages: 2054555
Policy zone: Normal
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8049828K/8349040K available (12300K kernel code, 2481K rwdata, 4224K rodata, 2396K init, 2416K bss, 299212K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 39284 entries in 154 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS: 524544, nr_irqs: 552, preallocated irqs: 16
Console: colour dummy device 80x25
console [tty0] enabled
ACPI: Core revision 20171215
ACPI: 2 ACPI AML tables successfully acquired and loaded
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x1
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000003e2e0000 end: 0x0000003e2fffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfed90000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 1700.004 MHz processor
tsc: Detected 1700.000 MHz TSC
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1881273ac8e, max_idle_ns: 440795257284 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 3400.00 BogoMIPS (lpj=6800000)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
process: using mwait in idle threads
Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
Spectre V2 : Mitigation: Full generic retpoline
Freeing SMP alternatives memory: 36K
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Atom(TM) CPU C3950 @ 1.70GHz (family: 0x6, model: 0x5f, stepping: 0x1)
Performance Events: PEBS fmt3+, Goldmont events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
CMCI storm detected: switching to poll mode
smp: Brought up 1 node, 16 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 16 processors activated (54400.00 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x7df94000-0x7e359fff] (3956736 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 15:10:16, date: 02/02/18
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1517584216.056:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFA09B356C5580 00007A (v02 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFA09B350CD800 0003AB (v02 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFA09B358BC800 00063B (v02 PmRef ApIst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFA09B350A2400 000231 (v02 PmRef ApCst 00003000 INTL 20061109)
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 4 GPEs in block 00 to 7F
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0x280000000-0x7fffffffff window]
pci_bus 0000:00: root bus resource [mem 0xfe010000-0xfe010fff window]
pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfa0fffff window]
pci_bus 0000:00: root bus resource [mem 0xfb000000-0xfb7fffff window]
pci_bus 0000:00: root bus resource [mem 0xfa100000-0xfa1007ff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:1980] type 00 class 0x060000
pci 0000:00:04.0: [8086:19a1] type 00 class 0x060000
pci 0000:00:05.0: [8086:19a2] type 00 class 0x080700
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: [8086:19a4] type 01 class 0x060400
pci 0000:00:09.0: reg 0x10: [mem 0xdff40000-0xdff5ffff 64bit]
pci 0000:00:09.0: enabling Extended Tags
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: [8086:19a5] type 01 class 0x060400
pci 0000:00:0a.0: reg 0x10: [mem 0xdff20000-0xdff3ffff 64bit]
pci 0000:00:0a.0: enabling Extended Tags
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0e.0: [8086:19a8] type 01 class 0x060400
pci 0000:00:0e.0: reg 0x10: [mem 0xdff00000-0xdff1ffff 64bit]
pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold
pci 0000:00:12.0: [8086:19ac] type 00 class 0x088000
pci 0000:00:12.0: reg 0x10: [mem 0xdff7a000-0xdff7a3ff 64bit]
pci 0000:00:13.0: [8086:19b2] type 00 class 0x010601
pci 0000:00:13.0: reg 0x10: [mem 0xdff74000-0xdff75fff]
pci 0000:00:13.0: reg 0x14: [mem 0xdff79000-0xdff790ff]
pci 0000:00:13.0: reg 0x18: [io 0xe050-0xe057]
pci 0000:00:13.0: reg 0x1c: [io 0xe040-0xe043]
pci 0000:00:13.0: reg 0x20: [io 0xe020-0xe03f]
pci 0000:00:13.0: reg 0x24: [mem 0xdff78000-0xdff787ff]
pci 0000:00:13.0: PME# supported from D3hot
pci 0000:00:15.0: [8086:19d0] type 00 class 0x0c0330
pci 0000:00:15.0: reg 0x10: [mem 0xdff60000-0xdff6ffff 64bit]
pci 0000:00:15.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:19d1] type 01 class 0x060400
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:18.0: [8086:19d3] type 00 class 0x078000
pci 0000:00:18.0: reg 0x10: [mem 0xdff77000-0xdff77fff 64bit]
pci 0000:00:18.0: PME# supported from D3hot
pci 0000:00:1f.0: [8086:19dc] type 00 class 0x060100
pci 0000:00:1f.2: [8086:19de] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdff70000-0xdff73fff]
pci 0000:00:1f.4: [8086:19df] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xdff76000-0xdff760ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xe000-0xe01f]
pci 0000:00:1f.5: [8086:19e0] type 00 class 0x0c8000
pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:01:00.0: reg 0x18: [mem 0xdfe04000-0xdfe04fff 64bit]
pci 0000:01:00.0: reg 0x20: [mem 0xdfe00000-0xdfe03fff 64bit]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PCI bridge to [bus 01]
pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:09.0: bridge window [mem 0xdfe00000-0xdfefffff]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xc000-0xc0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xdfd04000-0xdfd04fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xdfd00000-0xdfd03fff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PCI bridge to [bus 02]
pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:0a.0: bridge window [mem 0xdfd00000-0xdfdfffff]
pci 0000:00:0e.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [8086:15c8] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [mem 0xdf800000-0xdf9fffff 64bit pref]
pci 0000:04:00.0: reg 0x20: [mem 0xdfa04000-0xdfa07fff 64bit pref]
pci 0000:04:00.0: reg 0x30: [mem 0xdfc80000-0xdfcfffff pref]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs)
pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs)
pci 0000:04:00.1: [8086:15c8] type 00 class 0x020000
pci 0000:04:00.1: reg 0x10: [mem 0xdf600000-0xdf7fffff 64bit pref]
pci 0000:04:00.1: reg 0x20: [mem 0xdfa00000-0xdfa03fff 64bit pref]
pci 0000:04:00.1: reg 0x30: [mem 0xdfc00000-0xdfc7ffff pref]
pci 0000:04:00.1: PME# supported from D0 D3hot D3cold
pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs)
pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs)
pci 0000:00:16.0: PCI bridge to [bus 04]
pci 0000:00:16.0: bridge window [mem 0xdfc00000-0xdfcfffff]
pci 0000:00:16.0: bridge window [mem 0xdf600000-0xdfafffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 6 7 10 11 12 14 *15)
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x77e3d000-0x77ffffff]
e820: reserve RAM buffer [mem 0x7d3df000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7df94000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7f800000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: [mem 0x7fc00000-0x7fffffff] has been reserved
system 00:00: [mem 0xfed60000-0xfed60fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:04:00.0 BAR 7 [mem 0x00000000-0x000fffff 64bit]
pnp 00:01: disabling [mem 0x000e0000-0x000fffff disabled] because it overlaps 0000:04:00.0 BAR 10 [mem 0x00000000-0x000fffff 64bit]
pnp 00:01: disabling [mem 0x000e0000-0x000fffff disabled] because it overlaps 0000:04:00.1 BAR 7 [mem 0x00000000-0x000fffff 64bit]
pnp 00:01: disabling [mem 0x000e0000-0x000fffff disabled] because it overlaps 0000:04:00.1 BAR 10 [mem 0x00000000-0x000fffff 64bit]
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0x0500-0x05fe] has been reserved
system 00:01: [mem 0xff800000-0xffffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0b00-0x0b0f] has been reserved
system 00:03: [io 0x0b10-0x0b1f] has been reserved
system 00:03: [io 0x0b20-0x0b2f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:05: [io 0x1800-0x18fe] has been reserved
system 00:05: [mem 0xfed03000-0xfed03fff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci_bus 0000:00: max bus depth: 1 pci_try_num: 2
pci 0000:00:09.0: PCI bridge to [bus 01]
pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:09.0: bridge window [mem 0xdfe00000-0xdfefffff]
pci 0000:00:0a.0: PCI bridge to [bus 02]
pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:0a.0: bridge window [mem 0xdfd00000-0xdfdfffff]
pci 0000:00:0e.0: PCI bridge to [bus 03]
pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit]
pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit]
pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit]
pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit]
pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit]
pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit]
pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit]
pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit]
pci 0000:00:16.0: PCI bridge to [bus 04]
pci 0000:00:16.0: bridge window [mem 0xdfc00000-0xdfcfffff]
pci 0000:00:16.0: bridge window [mem 0xdf600000-0xdfafffff 64bit pref]
pci_bus 0000:00: No. 2 try to assign unassigned res
release child resource [mem 0xdfc00000-0xdfc7ffff pref]
release child resource [mem 0xdfc80000-0xdfcfffff pref]
pci 0000:00:16.0: resource 14 [mem 0xdfc00000-0xdfcfffff] released
pci 0000:00:16.0: PCI bridge to [bus 04]
pci 0000:00:16.0: bridge window [mem 0x00100000-0x001fffff] to [bus 04] add_size 400000 add_align 100000
pci 0000:00:16.0: BAR 14: assigned [mem 0x80000000-0x804fffff]
pci 0000:00:09.0: PCI bridge to [bus 01]
pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:09.0: bridge window [mem 0xdfe00000-0xdfefffff]
pci 0000:00:0a.0: PCI bridge to [bus 02]
pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:0a.0: bridge window [mem 0xdfd00000-0xdfdfffff]
pci 0000:00:0e.0: PCI bridge to [bus 03]
pci 0000:04:00.0: BAR 6: assigned [mem 0x80000000-0x8007ffff pref]
pci 0000:04:00.1: BAR 6: assigned [mem 0x80080000-0x800fffff pref]
pci 0000:04:00.0: BAR 7: assigned [mem 0x80100000-0x801fffff 64bit]
pci 0000:04:00.0: BAR 10: assigned [mem 0x80200000-0x802fffff 64bit]
pci 0000:04:00.1: BAR 7: assigned [mem 0x80300000-0x803fffff 64bit]
pci 0000:04:00.1: BAR 10: assigned [mem 0x80400000-0x804fffff 64bit]
pci 0000:00:16.0: PCI bridge to [bus 04]
pci 0000:00:16.0: bridge window [mem 0x80000000-0x804fffff]
pci 0000:00:16.0: bridge window [mem 0xdf600000-0xdfafffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0x80000000-0xdfffffff window]
pci_bus 0000:00: resource 9 [mem 0x280000000-0x7fffffffff window]
pci_bus 0000:00: resource 10 [mem 0xfe010000-0xfe010fff window]
pci_bus 0000:00: resource 11 [mem 0xfa000000-0xfa0fffff window]
pci_bus 0000:00: resource 12 [mem 0xfb000000-0xfb7fffff window]
pci_bus 0000:00: resource 13 [mem 0xfa100000-0xfa1007ff window]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xdfe00000-0xdfefffff]
pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xdfd00000-0xdfdfffff]
pci_bus 0000:04: resource 1 [mem 0x80000000-0x804fffff]
pci_bus 0000:04: resource 2 [mem 0xdf600000-0xdfafffff 64bit pref]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 50328K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x782a0000-0x7c2a0000] (64MB) mapped at [0000000055e77fff-0000000096ca9bd5]
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1881273ac8e, max_idle_ns: 440795257284 ns
clocksource: Switched to clocksource tsc
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:09.0: AER enabled with IRQ 25
pcieport 0000:00:0a.0: AER enabled with IRQ 26
pcieport 0000:00:0e.0: AER enabled with IRQ 27
pcieport 0000:00:16.0: AER enabled with IRQ 28
pcieport 0000:00:09.0: Signaling PME with IRQ 25
pcieport 0000:00:0a.0: Signaling PME with IRQ 26
pcieport 0000:00:0e.0: Signaling PME with IRQ 27
pcieport 0000:00:16.0: Signaling PME with IRQ 28
dpc 0000:00:09.0:pcie010: DPC error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
dpc 0000:00:0a.0:pcie010: DPC error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
dpc 0000:00:0e.0:pcie010: DPC error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
intel_idle: MWAIT substates: 0x2020
intel_idle: v0.4.1 model 0x5F
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ01] (0 C)
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: using zlib compression
pstore: Registered erst as persistent store backend
{1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 0
{1}[Hardware Error]: It has been corrected by h/w and requires no further action
{1}[Hardware Error]: event severity: corrected
{1}[Hardware Error]: Error 0, type: corrected
{1}[Hardware Error]: section_type: PCIe error
{1}[Hardware Error]: port_type: 4, root port
{1}[Hardware Error]: version: 1.16
{1}[Hardware Error]: command: 0x4010, status: 0x0140
{1}[Hardware Error]: device_id: 0000:00:05.0
{1}[Hardware Error]: slot: 0
{1}[Hardware Error]: secondary_bus: 0x00
{1}[Hardware Error]: vendor_id: 0x8086, device_id: 0x19a2
{1}[Hardware Error]: class_code: 070800
pci 0000:00:05.0: aer_status: 0x00002000, aer_mask: 0x0000c000
Advisory Non-Fatal
pci 0000:00:05.0: aer_layer=Transaction Layer, aer_agent=Receiver ID
pci 0000:00:05.0: broadcast error_detected message
pci 0000:00:05.0: AER: Device recovery failed
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
00:04: ttyS0 at I/O 0x3f8 (irq = 7, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:15.0: xHCI Host Controller
xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x01109810
xhci_hcd 0000:00:15.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.15.0-999-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:15.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
xhci_hcd 0000:00:15.0: xHCI Host Controller
xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.15.0-999-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:15.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
intel_rdt: Intel RDT L2 allocation detected
RAS: Correctable Errors collector initialized.
microcode: sig=0x506f1, pf=0x1, revision=0x18
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (1233280029, 0)->(1213406138, 19873891)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 987ec6e00323484daa6c35aa59d33bfdf384ff04'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
Magic number: 6:331:183
rtc_cmos 00:02: setting system clock to 2018-02-02 15:10:17 UTC (1517584217)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 2396K
Write protecting the kernel read-only data: 20480k
Freeing unused kernel memory: 2008K
Freeing unused kernel memory: 1920K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
ACPI Warning: \_SB.PCI0.PEX0._PRT: Return Package has no elements (empty) (20171215/nsprepkg-130)
ahci 0000:00:13.0: version 3.0
dca service started, version 1.12.1
ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k
ixgbe: Copyright (c) 1999-2016 Intel Corporation.
ahci 0000:00:13.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0x7 impl SATA mode
ahci 0000:00:13.0: flags: 64bit ncq led clo only pmp pio ems deso sadm sds apst
ahci 0000:00:13.0: both AHCI_HFLAG_MULTI_MSI flag set and custom irq handler implemented
r8169 0000:01:00.0 eth0: RTL8168h/8111h at 0x00000000d5858c59, a0:42:3f:36:d8:ee, XID 14100880 IRQ 38
r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
ACPI Warning: \_SB.PCI0.PEX1._PRT: Return Package has no elements (empty) (20171215/nsprepkg-130)
pcieport 0000:00:0a.0: can't derive routing for PCI INT A
r8169 0000:02:00.0: PCI INT A: not connected
r8169 0000:02:00.0 eth1: RTL8168h/8111h at 0x000000000a725b3c, a0:42:3f:36:d8:ef, XID 14100880 IRQ 39
r8169 0000:02:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
ata1: SATA max UDMA/133 abar m2048@0xdff78000 port 0xdff78100 irq 30
ata2: SATA max UDMA/133 abar m2048@0xdff78000 port 0xdff78180 irq 31
ata3: SATA max UDMA/133 abar m2048@0xdff78000 port 0xdff78200 irq 32
r8169 0000:01:00.0 enp1s0: renamed from eth0
r8169 0000:02:00.0 enp2s0: renamed from eth1
usb 1-1: new full-speed USB device number 2 using xhci_hcd
ixgbe 0000:04:00.0: HW Init failed: -17
ixgbe: probe of 0000:04:00.0 failed with error -17
usb 1-1: New USB device found, idVendor=0403, idProduct=6001
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: FT232R USB UART
usb 1-1: Manufacturer: FTDI
usb 1-1: SerialNumber: A800fq8V
ata3: SATA link down (SStatus 4 SControl 300)
ata1: SATA link down (SStatus 4 SControl 300)
ixgbe 0000:04:00.1: HW Init failed: -17
ixgbe: probe of 0000:04:00.1 failed with error -17
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-8: OCZ-ARC100, 1.01, max UDMA/133
ata2.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA OCZ-ARC100 1.01 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 1:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target User and Group Name Lookups.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
systemd-journald[337]: Received request to flush runtime journal from PID 1
Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ismt_smbus 0000:00:12.0: enabling device (0140 -> 0142)
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
cryptd: max_cpu_qlen set to 1000
usbcore: registered new interface driver usbserial_generic
SSE version of gcm_enc/dec engaged.
usbcore: registered new interface driver ftdi_sio
ftdi_sio 1-1:1.0: FTDI USB Serial Device converter detected
usb 1-1: Detected FT232RL
usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB0
EDAC MC0: Giving out device to module pnd2_edac controller Pondicherry2: DEV pnd2/dnv (INTERRUPT)
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain dram
audit: type=1400 audit(1517584219.200:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=663 comm="apparmor_parser"
audit: type=1400 audit(1517584219.200:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=662 comm="apparmor_parser"
audit: type=1400 audit(1517584219.200:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=665 comm="apparmor_parser"
audit: type=1400 audit(1517584219.200:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=669 comm="apparmor_parser"
audit: type=1400 audit(1517584219.200:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=666 comm="apparmor_parser"
audit: type=1400 audit(1517584219.200:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=666 comm="apparmor_parser"
audit: type=1400 audit(1517584219.204:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=667 comm="apparmor_parser"
audit: type=1400 audit(1517584219.204:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=671 comm="apparmor_parser"
audit: type=1400 audit(1517584219.204:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=659 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
r8169 0000:01:00.0 enp1s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
r8169 0000:02:00.0 enp2s0: link down
r8169 0000:02:00.0 enp2s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
r8169 0000:02:00.0 enp2s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
random: crng init done
CMCI storm subsided: switching to interrupt mode
perf: interrupt took too long (2529 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
perf: interrupt took too long (3292 > 3161), lowering kernel.perf_event_max_sample_rate to 60750
perf: interrupt took too long (4247 > 4115), lowering kernel.perf_event_max_sample_rate to 47000
python (1014): drop_caches: 3
python (1014): drop_caches: 3
python (1208): drop_caches: 3
python (1208): drop_caches: 3
python (1401): drop_caches: 3
python (1401): drop_caches: 3